Sealcoating
A protective wear layer over sound asphalt, applied with proper coverage and clean hand-cut edges where the pavement meets concrete.
Serving Memphis, Tennessee & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Sealcoating in Olive Branch, MS
Asphalt sealing and pavement maintenance for Olive Branch homes and businesses, with prep that earns the coat and a cure time you can schedule around.
Protecting the surface
Asphalt fails from the top down and from water getting underneath, and sealcoating addresses the first of those while crack work addresses the second. Running them together is why a maintenance visit usually buys more time than either would alone, and it is how we scope most Olive Branch properties.
What we will not do is coat a surface that needs something else. If the pavement flexes under a vehicle, if cracking has gone tight and interconnected across an area, or if the edges are crumbling away, those point to the base rather than the surface. We will explain what we are seeing and what order the work should go in, and that conversation happens before any quote is signed.
Available work
These are the services that come up most here, and they are commonly combined into a single scheduled visit.
A protective wear layer over sound asphalt, applied with proper coverage and clean hand-cut edges where the pavement meets concrete.
Cracks cleaned out and sealed with a flexible material, which keeps water from reaching the base and is the cheapest work on this list by a distance.
Failed pavement removed to sound material and rebuilt at thickness, with compaction, so the patch does not lift at its edges under traffic.
New surfacing and resurfacing where a seal coat is no longer the right answer, with the base prepared and compacted before anything is laid.
Stalls, arrows, stop bars, and accessible markings painted so they are legible to a driver moving through the lot.
What we look at
Four observations settle most of the scope, and all four come from walking the pavement rather than looking at a photo.
Start to finish
Each stage assumes the one before it is done, which is the whole reason the sequence is fixed.
A walkthrough, measurements, and a straight account of what the pavement needs, including anything we think should wait or be done differently.
Vehicles and loose items off the surface, then cleaning, with stained areas treated separately so the coating has something it can actually grip.
Repairs completed before coating. Sealing over a crack that is still open or moving is the most common way this work gets wasted.
Application, then a reopening time for foot and vehicle traffic that reflects the day's conditions rather than a number from a brochure.
Cost drivers
Sealcoating in the Memphis area typically ranges from about $0.20 to $0.45 per square foot. A standard single-car driveway often lands around $250 to $450, while larger driveways or small lots commonly run $500 to $1,200+ depending on layout and condition.
The other services are quoted against the actual work rather than that per-foot range: crack sealing depends on how much cracking there is, patching on how many areas and how deep, and striping on the layout and marking count. All of it goes in the written quote.
Recent work
Photographs from recent sealcoating, repair, and striping jobs in the Memphis area.
Questions answered
These come up on most first calls, and the answers do not change much from property to property.
Yes. Olive Branch is part of the area we cover from our Memphis location, and the work runs the same way there as it does anywhere else we serve.
No, and it is not meant to. Sealcoat is a surface wear layer. Cracks need to be cleaned and sealed as their own step, ideally before the coat, or they come straight back through the new finish.
It does. Petroleum prevents the sealer from bonding, so those areas get treated as part of prep. Skipping that step is how a coat ends up peeling in exactly the spots people look at most.
Anything that needs to cure wants dry conditions and warm pavement, so the warmer, drier stretches are the reliable windows. We will schedule against the forecast rather than apply into weather that will compromise the result.
It depends what is under it. If the surface is oxidized but the base is sound, sealing is usually good value. If the base is failing, the honest answer is that repairs or resurfacing come first, and we would rather tell you that than take the sealing work.
Yes, where that keeps a business running. Phasing a lot by section keeps your access open, and we set that sequence with you before starting.
Talk to us
Describe the surface and we will come look at it, tell you what it needs and in what order, and quote it properly.
Request a quote
Send the size and condition and we will come look at it, then put a written scope and price in front of you.