Driveway sealcoating
Protective sealing for residential asphalt, with coverage planned for the apron and street approach and the edges cut cleanly at every concrete joint.
Serving Memphis, Tennessee & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Sealcoating in Germantown, TN
Sealcoating and asphalt maintenance for Germantown driveways and commercial pavement, with more square footage and more seams accounted for in the scope.
Scope and square footage
Larger lots and longer drive approaches mean more square footage and more seams to protect from water, and both of those shape how a sealcoating job gets quoted and scheduled here. A bigger surface is not simply a bigger version of a small one: it has more joints where pavement sections meet, more edge against concrete, and usually more variation in how different parts have weathered.
So the walkthrough matters. We look at where water collects, where the surface has gone gray and porous, and where seams have opened, then scope the work against what we found rather than against a square-foot total. The parts of the surface taking the most traffic get planned coverage, not an average.
What we offer
Most Germantown jobs are a sealcoat plus some crack work, though all of these are available on their own.
Protective sealing for residential asphalt, with coverage planned for the apron and street approach and the edges cut cleanly at every concrete joint.
Lot sealing phased so parking stays usable, with entrances and turning areas treated for the loads they actually carry.
Seams and cracks cleaned and filled with a flexible sealant, which is the single most useful thing you can do for a large surface.
Localized failures cut out and rebuilt from the base up, which is the durable answer when an area has gone to interconnected cracking.
Markings repainted after the coat cures, laid out to be readable at speed and to hold up where tires track across them.
On the walkthrough
These four things decide the scope, the sequence, and how long you will need to stay off the surface.
Working order
Same four stages every time, with the written scope settled before anything is cleaned or coated.
A full walkthrough, with the surface measured and the repair work identified and priced separately so you can see what is sealing and what is repair.
Clearing, cleaning, and treating any stained areas. On a larger surface this is the stage that most affects how the finished coat looks.
Joints and cracks handled first, because on a big surface these are where failure starts and where a coat alone achieves least.
The coat goes on with hand-cut edges, and we tell you when people can walk on it and when vehicles can return, based on that day's conditions.
Pricing by condition
Sealcoating in the Memphis area typically ranges from about $0.20 to $0.45 per square foot. A standard single-car driveway often lands around $250 to $450, while larger driveways or small lots commonly run $500 to $1,200+ depending on layout and condition.
Because Germantown surfaces are often on the larger side, many land in that upper band on square footage alone. Repairs, paving, and striping are quoted on their own terms, measured by the work rather than by coated area.
Recent work
Photographs from recent sealcoating, repair, and striping jobs in the Memphis area.
Germantown FAQs
Most of these are about whether a bigger surface needs a different approach, and in a couple of ways it does.
Not usually. What it needs is correct coverage and proper attention at the high-wear areas, which is a planning question rather than a question of how many coats go down.
Those get sealed as prep. A seam is an open path to the base, so leaving it and coating over the top gives you a tidy-looking surface with the same problem underneath.
Most residential work is a single day on site, with the cure window after it being the part that affects you. Larger commercial surfaces may be phased, which we plan with you in advance.
Yes. We need the pavement dry, so sprinkler schedules matter, and we will ask you to hold them off around the application and the cure window.
It is, provided the cracks are sealed first and the base is sound. Sealing after crack work protects what you just repaired. Sealing instead of crack work does not.
Yes, alongside residential. Commercial scheduling usually needs more staging detail so traffic and pedestrians stay safe while the surface cures.
Book a walkthrough
We will measure the surface, separate the sealing from the repairs, and hand you a written quote you can hold us to.
Request a quote
Send the size and condition and we will come look at it, then put a written scope and price in front of you.