Residential driveway sealing
Asphalt sealing for homes, with neat lines where the pavement meets concrete and even coverage through the apron, the turn, and the approach to the street.
Serving Memphis, Tennessee & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Sealcoating in Collierville, TN
Driveway and parking lot sealing for Collierville properties, with the prep done properly, the edges cut by hand, and a cure window you can plan around.
Where sealing helps
A longer drive approach changes the arithmetic on a seal coat. More square footage means more surface to protect and more seams where water can get underneath, and it also means the wear is rarely even: the apron and the first stretch at the street take the turning loads, while the middle of the run mostly takes sun.
That is worth reading before quoting. We walk the whole surface rather than measuring it and multiplying, because the areas doing the most work are the ones that decide whether a coat lasts. Where the asphalt has oxidized but holds together, sealing is straightforward. Where it has started losing aggregate or cracking along a seam, that part gets handled first.
The services
Any of these can run on their own or as one scheduled visit, which is usually cheaper than treating them as separate jobs.
Asphalt sealing for homes, with neat lines where the pavement meets concrete and even coverage through the apron, the turn, and the approach to the street.
Commercial sealing planned around your operating hours, with the drive lanes and entrance zones given the coverage their traffic justifies.
Open cracks routed, cleaned, and filled with a flexible sealant so they stop taking on water, which is what turns a crack into a structural problem.
Potholes and failed sections saw-cut to clean edges, tacked, and rebuilt to depth, rather than filled at the surface where tires peel the repair back out.
Fresh stalls and markings after sealing, including accessible spaces and the layout details an inspection looks at.
What drives the quote
Two properties of the same square footage can quote differently, and these are usually why.
The sequence
The order matters more than the speed, and the cure window is the part people most need to plan around.
We read the surface, measure it, and flag anything that needs repair before coating, then write the scope down with what is and is not included.
The area is cleared and cleaned. Oil-saturated spots near garages, dumpsters, or loading areas get treated, because petroleum stops sealer from bonding and causes peeling.
Crack sealing and any patching happen before the coat goes down, so the finish is not telegraphing a crack line within weeks.
Application with hand-cut edges, then a specific reopening time for foot traffic and for vehicles, set by the day's temperature, humidity, and the site's shade.
What it costs
Sealcoating in the Memphis area typically ranges from about $0.20 to $0.45 per square foot. A standard single-car driveway often lands around $250 to $450, while larger driveways or small lots commonly run $500 to $1,200+ depending on layout and condition.
Longer approaches and wider parking areas sit toward the upper end of that simply because there is more of them. Repair work is quoted separately against what is actually there, since crack sealing, patching, paving, and striping are none of them measured by coated area.
Recent work
Photographs from recent sealcoating, repair, and striping jobs in the Memphis area.
Common questions
Questions here tend to be about sequencing and about whether a bigger surface changes the approach.
The method is the same, but the reading changes. The apron and the street approach get read separately from the middle of the run, because those take the turning loads and tend to wear first, and coverage is planned accordingly.
After. Sealer covers existing markings, so stalls and arrows are repainted once the coat has cured. Planning both as one visit saves a second mobilization.
Residential driveways commonly go a few years between coats depending on sun exposure and traffic. Commercial lots often run a two to four year cycle, with entrances and drive lanes showing wear first and sometimes needing attention sooner.
We say so and separate it out. Sealing a sound area while a failed section is repaired is normal, and it is better than coating the whole surface and watching one part fail anyway.
That is the plan every time. Sealer needs dry conditions and warm pavement to cure properly, so we schedule against the forecast and will move a date rather than apply into conditions that compromise the cure.
Yes. Residential and commercial asphalt both, with the planning adjusted for traffic patterns and access on business properties.
Get started
We will walk the surface, tell you what it needs and in what order, and give you the number in writing.
Request a quote
Send the size and condition and we will come look at it, then put a written scope and price in front of you.